My Number 1 Free shipping over 120 EUR * United Kingdom
Choose language and shop

LiPo Pack LiPo Battery 2S 7.4V 350 mAh 30C (JST) MODSTER PowerPack Easy Trainer 800


Product number: 126472
  • JST connector, 2S 7.4V 350mAh 30C
  • suitable for MODSTER Easy Trainer 800
  • Very high energy densities
  • Proven MODSTER quality
  • Sensational price and performance ratio
Available from 28-30 business days
Forget selection
{{ Math.round(store.extensions.neti_store_pickup_distance.distance * 100) / 100 }} {{ store.extensions.neti_store_pickup_distance.unit }}
{{ store.label }}
{{ store.street }} {{ store.streetNumber }}
{{ store.zipCode }} {{ }}
Opening times:
Ladekabel & Stecker
Ladekabel BEC 0,35mm²
Ladekabel BEC 0,35mm²
Add to shopping cart
Number 1
LiPo Pack LiPo Battery 2S 7.4V 350 mAh 30C (JST) MODSTER PowerPack Easy Trainer 800


MODSTER PowerPacks: Sensational price & performance ratio!

These PowerPacks are the 1st choice of the ambitious modeler:
The main focus is on the assembly with the connector systems used at MODSTER and the accuracy of fit of the battery in the car, plane, boat,etc. in question.
However, MODSTER PowerPacks are also a great choice when used with other model brands!

The batteries have C-rates of 20-50C and can therefore be loaded with 20-50 times the rated capacity, depending on the designated C-rate! For a short time, about 10-15 seconds, also with double the value of the continuous load. The C-rates depend on the requirements of the devices for which they are designed and manufactured.

In the name of the product are always mentioned the connections:
Deans, EC3, XT60 and many more! The balancer connector is always ,,XH".

This honest battery line comes from one of the largest producers of lithium polymer batteries in the world. The batteries are assembled, tested and packed especially for MODSTER after careful cell selection. Elaborate quality assurance processes during production and before delivery ensure consistently high quality.

Lithium batteries are rechargeable batteries with very high energy density and require special care in handling, as well as charging/discharging.


  • Preheating of cold accumulators increases performance and service life
  • Storage temperature at room temperature of 20-25
  • Always store in a partially charged state at approx. 60%.
  • Protect from short circuit, damage, overheating, deep discharge and overcharge
  • Only charge with a charger suitable for lithium batteries with the correct charging program outside the model and on a fireproof surface
  • Do not use or charge batteries with cell damage or in a swollen state, but dispose of them properly.
  • Never charge or discharge unattended!
Akku Typ: LiPo
Anschlusstecker: BEC (JST)
Bauart Anwendung: Allgemeiner Antriebsakku
Breite ca. in mm: 17 mm
Gewicht ca. in g: 25 g
Höhe ca. in mm: 13 mm
Kapazität in mAh: 350 mAh
Länge ca. in mm: 45 mm
Zellenanzahl in S: 2 S